Product Highlights:：

S series anti-corrosive centrifugal pump are made of reinforced polypropylene(RPP) and Poly  vinylidene fluoride (PVDF) through one-time injection molding.  Due to its superior anti-corrosion performance, simple structure, and convenient maintenance, it has been widely used in industries with corrosive environments such as chemical, pharmaceutical, and pesticide industries.  Its high efficiency and low price make it an ideal product to replace stainless steel pumps, PTFE pumps, and other non-metallic pumps.

Product Highlights:：

The entire unit only has one sealing surface, with few leakage points and high self suction height.

Depending on the temperature of the medium, the equipment will not be damaged within 15 to 30 minutes of liquid interruption and idling.

Without inserts, it will not cause overall pump failure due to corrosion of the inserts.

Patented machine seal, with a cooling surface 3-6 times that of a conventional machine seal.

The most expensive accessory of the entire equipment, except for the motor - the pump casing, does not need to be replaced unless it is damaged by external forces or the medium is not suitable.

Cooperation hotline: 0571-64702198

Product Highlights:：

In 2000, we invented a fully plastic horizontal water jet vacuum unit

Sixteen improvements, so unique

The circular box is made of fiberglass reinforced polypropylene material similar to the centrifugal pump

Added imported raw material UV resistant formula

Adopting patented machine seal

Cooperation hotline: 0571-64702198

Product Highlights:：

Currently recognized by the environmental protection department for use

Sealed operation, centralized treatment of waste gas and wastewater

Can be used for solvent recovery

The upper part uses a coil heat exchanger with fewer leakage points

The lower part can be selected as a coil heat exchanger or our patented "finned graphite modified polypropylene heat exchanger" (with a large heat exchange area and good cold zone effect)

The water tank is wrapped as a whole, without welds, and has a long service life

Split design for easy replacement

Procurement hotline: 0571-64702198

Product Highlights:：

Small footprint,

More comprehensive consideration and more energy-efficient use

One damaged and repaired, one opened for use, without delaying production

Patented machine seal for more durability

The water tank is wrapped as a whole, without deformation or cracking

Cooperation hotline: 0571-64702198

Product Highlights:：

The water tank is wrapped as a whole, and the cylinder has no welds

Can achieve water tanks of 6 meters, 8 meters, 10 meters, and 12 meters without the need for splicing

N water jet vacuum pumps share a common water tank, suitable for rotating use. The water tank is large, the water temperature rises slowly, and the vacuum degree is high

Steel lined plastic storage tanks can be selected as water tanks

It is economical to use an external large condenser to cool the circulating water in the water tank

Cooperation hotline: 0571-64702198

Product Highlights:：

Reasonable design, compact structure, shorter pipelines, and less losses

Free choice of two or three leaf roots

Optional anti-corrosion coating

Cooperation hotline: 0571-64702198

Product Highlights:：

Product Highlights:：

Partially addressing high vacuum issues in corrosive environments

New "finned graphite modified polypropylene heat exchanger" can be installed to assist in reducing water temperature, saving water and energy, and achieving higher vacuum degree

Also using a new type of mechanical seal, with an overall wrapped water tank

Cooperation hotline: 0571-64702198

Product Highlights:：

Can reach a high vacuum of 5Pa

Coatings such as nickel phosphorus alloy, Hastelloy alloy, or Teflon can be used in corrosive environments

Low noise and energy consumption

No wastewater, no oil pollution, conducive to obtaining clean gas

Cooperation hotline: 0571-64702198

Product Highlights:：

High suction and vacuum stability

Suitable for conventional solvent environments and corrosion-resistant acid-base environments

The overflow part is lubricated without oil, which is conducive to the recovery of exhaust gas and can obtain a clean vacuum

Green and environmentally friendly products, no secondary water pollution, reducing pollution control pressure

Type B is completely oil-free and solvent resistant, resistant to various organic solvent corrosion. Type F is made of stainless steel and corrosion-resistant. Type T is made of titanium alloy and is resistant to strong acids and alkalis

Cooperation hotline: 0571-64702198

Product Highlights:：

Recovery of Hcl to prepare hydrochloric acid, recovery of SO2, NH3, P2O5, H2S

Suitable for gas recovery that can be absorbed by water or neutralized by acid or alkali

Rich experience and strong strength, having designed solutions for some environmental protection institutes

Free consultation, free design, assistance in installation and debugging

More than 20 years of production experience, process safety, and emission standards

The person in charge is the first batch of national environmental engineering (waste gas) project managers (senior) and senior waste gas treatment engineers

Cooperation hotline: 0571-64702198

Product Highlights:：

Complete supply without installation (customized ultra wide and ultra high equipment requires some simple assembly for easy transportation)

A small amount of exhaust gas is treated nearby, with low investment and fast speed

Cooperation hotline: 0571-64702198

Product Highlights:：

Suitable for corrosive environments, high-temperature dust requires cooling treatment

Glass fiber reinforced polypropylene or PPH material for customers to choose from

Whether you need a vortex plate tower of 8 meters, 10 meters, or 15 meters, we can all be formed in one go without the need for splicing

Dust washing can be centralized and recycled in the tower kettle after being washed

Low investment, short production and installation cycle

Dust removal and absorption effects reach over 98%

Imported UV resistant raw materials, no splicing welds, long service life

Cooperation hotline: 0571-64702198

Product Highlights:：

Excellent anti-corrosion performance

Whether you need a packed absorption tower of 8 meters, 10 meters, or 15 meters, the tower kettle and tower body are wound together in one go without the need for splicing

Imported UV resistant raw materials

Glass fiber reinforced polypropylene or PPH material for customers to choose from

The service life is 2-3 times that of welding equipment

A very cost-effective exhaust gas absorption device

Cooperation hotline: 0571-64702198

Product Highlights:：

If the temperature is too high and the absorption is not good, use a falling film absorber to absorb while cooling and absorbing

I have produced a 200 square meter heat exchanger, and there is no pressure in the production of large falling films, and even less problem in small ones

Free set design

Special graphite polypropylene pipe with a graphite content of 50% and good heat exchange effect

Cooperation hotline: 0571-64702198

Product Highlights:：

In 1984, Zhang Zhiqiang, the founder of our company, participated as the only representative of the enterprise at that time in the development of the first polypropylene heat exchanger in the anti-corrosion department of Zhejiang University of Technology, solving the problem of polypropylene welding. From then on, the production and use of polypropylene equipment began in China

200 square meters, the larger the area, the greater the expansion force of the tube, and the higher the requirements for product design and quality. Few enterprises can produce 200 square meters of this type of heat exchanger, which reflects the quality and strength

Economical and cost-effective, with excellent anti-corrosion performance, but lower thermal conductivity than graphite and metals

Cooperation hotline: 0571-64702198

Product Highlights:：

Overall winding of storage tank body

Material selection 1: Glass fiber reinforced polypropylene, with better overall performance, originally used for polypropylene centrifugal pumps, recommended

Material selection 2: PPH has better high-temperature resistance, but relatively weaker low-temperature resistance, good rigidity, and is more brittle

Imported formula UV resistant raw materials

Uniform thickness, no cutting corners, no upper thickness, lower thickness, aging resistance, good stability, and longer equipment service life

Cooperation hotline: 0571-64702198

Product Highlights:：

Integral winding of vacuum measuring tank body

Material selection 1: Glass fiber reinforced polypropylene, with better overall performance, originally used for polypropylene centrifugal pumps, recommended

Material selection 2: PPH has better high-temperature resistance, but relatively weaker low-temperature resistance, good rigidity, and is more brittle

Imported formula UV resistant raw materials

Uniform thickness, no cutting corners, no upper thickness, lower thickness, aging resistance, good stability, and longer equipment service life

Cooperation hotline: 0571-64702198